CREATIVE SUNDAY || GUIDE ON HOW I MADE THESE PALM SLIPPERS

Hello everyone, welcome to my blog this beautiful Sunday afternoon, it is always a pleasurable time for me everyday Sunday, because I get the opportunity to feed my eyes with as many creative talent as possible in the hive learners community, and today I'll love to grace your sight with a piece of my creativity as well.

If you are familiar with my blog from my early days on the blockchain, you will know that I frequently shared shoemaking DIY guides and the like. However, moving to a new environment has forced me to stop exploring it for the time being. However, when looking through my phone gallery, I discovered the step-by-step photos I took for how I made the palms slippers, and since I have not previously published this particular one, I decided to use it as an entry for my creative Sunday publication.

https://files.peakd.com/file/peakd-hive/vickoly/23x1abcXk2RqBSvQFCTSyjYUtnF9iuT4h69CRd45vXCLbNJS2b6593xDrPS9a4HbdhNgp.png

https://files.peakd.com/file/peakd-hive/vickoly/23x1abcXk2RqBSvQFCTSyjYUtnF9iuT4h69CRd45vXCLbNJS2b6593xDrPS9a4HbdhNgp.png

TOOLS AND MATERIALS USED

• Brown leather material
• Black linning
• Marco size 4
• Brown leather linning
• Polyurethane outsole
• Gum
• Scissor
• Brush
• Logo design

https://files.peakd.com/file/peakd-hive/vickoly/23x1abcXk2RqBSvQFCTSyjYUtnF9iuT4h69CRd45vXCLbNJS2b6593xDrPS9a4HbdhNgp.png

MAKING PROCESSES

After purchasing the necessary materials and putting aside the tools, I began work on the palm slippers by:

• Cutting the brown leather material and Marco for the insole, which I drew a pattern of my Leg on with a leather, and then cut out the shape with a scissor.

• Applying gum on the back of the brown leather linning and the Marco, and joining them together, by wrapping the brown linning on the Marco.

• To make the upper of this palm slippers, I cut brown leather into my desired shape, after which i attach the logo design on the upper and place the upper on the black linning.

• After completing the upper design and the insole, I both to the filing machine and file their edges, so it can have a rough surface that's perfect for joining.

https://files.peakd.com/file/peakd-hive/vickoly/23wqnKt1t4bt7tc9i3viJAZNBKK34ga5mooe5jjDWnse53NTFUEGQuFtxhNsCRGfPoKHm.jpg

• I rub gum on the side of the upper design and the back of the insole after filling both.

• I joined them together, and apply gum on the outsole and attached everything together.

• Here is how the palm slippers I made looks like after the final touch.

https://files.peakd.com/file/peakd-hive/vickoly/23x1abcXk2RqBSvQFCTSyjYUtnF9iuT4h69CRd45vXCLbNJS2b6593xDrPS9a4HbdhNgp.png

That's about all on my creative Sunday project for today, which entails the step by step process of how I made these palm Slippers.